APPLICATIONS

FEDERSOLV DW44 is a mix of paraffin solvents which cannot be solved in water and boast slow evaporation. It consists in the removal of the pre-existing layer prior to proceed with a new impregnating coat with FEDERCOTT/C or with LUX wax in paste or with COVER. Specific  dissolvent  of  old treatments performed with resins, silicones, waxes in natural and synthetic paste, metal waxes. It eliminates old layers of linseed oil and dirt stuck in the paste waxes on old floors, also of greasy-oily nature. It must be performed when the floor treated is so stained and dirty to require deep cleaning. Ideal for any type of rustic or polished, old or modern, smooth or worked cotto. For natural and artificial stones, wood, klinker, gres, ceramics and in general for surfaces which are resistant to solvents.  For  this  purpose, specific  waxing  removing products are used such as DECand FEDERSOLV DW44. FEDERSOLV DW44 is used effectively to uniform opacity and lines due to improper application. It does not generate foam.

HOW TO USE

In  order  to  remove  wax, impregnate a cloth abundantly, turn it and substitute it often or use a brush. Dilute FEDERSOLV DW44 as follows: 5 doses of product in 2 litres of water prior to use. Introduce the solution in the disc's or brush’s tank and remove the wax. Collect the dissolved dirt using a fluid sucking machine, then rinse

PRECAUTIONS

Vent the room well when usingthe product.

WARNINGS

The MSDS is available uponrequest.

PACKAGING

Can of 1 lt. Box of 12/24 pcs

HANDLING AND STORAGE

The product must be stored in theoriginal containers, perfectlysealer, at a temperature between 0and 30°C and shielded fromdirect  sunlight.  In  theseconditions, the product has a self-life of 12 months of the datequotedin the delivery note. If thematerial has been stored forlonger than its recommended self-life, it mightstill be suitable, butthis  has  to  be  determined  beforehand by performing qualitychecks on itsapplication-relatedproperties.