Description

ILPA JOLLY GLASS (available in liquid and tixo densities) is made of combined synthetic resins and it is mainly used to glue and fill up any type of marble and natural stone. It satisfies any request from the end-user thanks to the available densities. With a strong grip, it becomes very tenacious and perfectly polishable after hardening.

JOLLY GLASS mastic is colourless and it is ideal for particular works such as filling holes in travertine especially when you want to leave them visible.

TECHNICAL DATA

	LIQUID	TIXO	TIXO SPECIAL
Specific weight	1100 ± 20 g/ml	1100 ± 20 g/ml	1250 ± 50 g/ml	(MI 001)
Viscosity	600 ± 100 cP	1500 ± 300 Pas	1400 ± 200 Pas	(MI 002, MI 002B; 25°C)
Color	Clear, colourless	Iced white	White
Formulations	M2149	M4120	M4184

STORAGE

Keep the container well closed and stored in a cool (temperature below 25°C) and ventilated environment for a maximum period of 12 months (normal versions) and 6 months (special version) from the date of production marked on the tin. Avoid direct sun exposure.

SAFETY RULES

Ensure work area is well-ventilated during application and until surface is dry. It is recommended the use of personal protective equipment during application. Read the safety sheet before application.

APPLICATION

Make sure that the surfaces to be treated are perfectly dry and clean;
Mix the product appropriately;
With clean tools, get from the tin the putty you need and add from 2 to 4 grams of hardener every 100 gr. of product;
Mix the compound properly;
Apply JOLLY GLASS on the surface to be glued or filled, bearing in mind that the total curing time can be affected by air temperature: above 25 C° it decreases, below 25 C° it increases;
Do not store the unused catalyzed putty in order to avoid that the whole contents of the tin deteriorates;
Seal the tin after use to avoid that the product gets hard by contact with the air.

Application	Putty knife
Hardener	3 – 5% Methyl Ethyl Ketone Peroxide
Gel time	20 – 30 min for normal tixo version 5 – 10 min for liquid and tixo special versions	(MI 003; 25 °C)
Ready for stacking	2 h for normal tixo version 20 – 30 min for liquid and tixo special versions	(MI 012; 25°C)
Complete curing	24 h for normal tixo version 6 h for liquid and tixo special versions	(MI 012; 25°C)
Polishable	After 24 h for normal tixo version After 6 h for liquid and tixo special versions	(MI 012; 25°C)

ILPA JOLLY GLASS Fit Checks for Invisible Stone Repair

ILPA JOLLY GLASS is a transparent mastic for marble and stone work where the repair should stay visually quiet after polishing. As a colorless synthetic resin mastic, it is most useful for invisible repair, liquid and tixo application choices, and filling visible holes in travertine or light-colored stone without making the repair look heavy.

Buyer check	Why it matters	What to confirm
Invisible repair goal	A transparent mastic is selected when a repair needs strength without a strong color signal.	Confirm the stone color, light transmission, viewing distance, and whether a clear finish is better than a color-matched repair.
Liquid and tixo versions	Different consistencies help with different gaps, holes, and vertical or horizontal repair positions.	Use liquid behavior for flow and narrow filling, and tixo behavior when placement control or sag resistance matters.
Travertine visible holes	Travertine and similar stone can show filled holes clearly if the product does not polish cleanly.	Check hole size, edge cleanliness, surface preparation, cure timing, and the expected polish level after repair.
Polishable bond quality	The repair has to survive finishing work as well as bonding or filling.	Confirm sanding, polishing, gloss target, and whether the repaired area will be inspected under direct light.

Choose ILPA JOLLY GLASS when the job needs transparent mastic behavior for clear stone filling, invisible repair, and a polishable bond on marble, travertine, or other light stone. For visible marble joints where color matching matters more, compare ILPA JOLLY MASTIC; for clear and vertical mastic options, compare ILPA JOLLY TRANSPARENT and TIXO GOLD.

Related planning paths: compare ILPA JOLLY MASTIC for color-matched visible stone repair, review ILPA JOLLY TRANSPARENT and TIXO GOLD for clear or vertical mastic work, compare the broader stone adhesive archive, and use ILPA EPOKITT EPOXY RESIN when low-viscosity crack reinforcement is the goal.